MEASURING METHOD B - THE MASKING TAPE METHOD

 

Answer: 

THE MASKING TAPE METHOD: 

1) We are finding that using a high-quality masking tape, or painter's tape, can give good results in terms of measuring one's own wrist. A high-quality masking tape should not stretch length wise. 

2) You can gently tape a section of masking tape around your wrist proper (see green section in diagram below), and then draw one line across both ends where the masking tape overlaps. You can then lay this masking tape flat on a table and measure carefully between the two lines. 

3) PLEASE NOTE: Please make sure you do not apply any tension to the masking tape, but also make sure there is no slack at all. Try to apply the masking tape as evenly as possible for accurate results. (If you have substantial wrist hair, do your best to measure against your skin by tamping down the hair as much as possible.)

4) Once you are confident you have an accurate measurement, you can give us this number, and the watch you will be using the bracelet on, and we can give you a very accurate final size recommendation.

🙂

 

PLEASE EMAIL US FROM HERE WITH ANY QUESTIONS!